ESD / SMT
Clean rooms, Electronics manufacturing assembly, Test
areas, Computer and electronic equipment installations,
Communication center, ESD facilities, Laboratories,
Explosion-hazard rooms, Control rooms etc.
- Permanent conductivity
- A homogeneous solid vinyl tile with conductive elements
distributed throughout its entire thickness.
- Excellent characteristics of chemical resistance, anti-scratch, dimensional stability and durability.
ESD Rubber Mat
The anti-static mat ‘ground’ the static charge that has built up
on the body, clothes and any tools when it is laid on a shelf or
on the floor and connected to the Earth grounding point. It
protect all ESD devices from any damage. These mats are
specially fabricated with a conductive material and
- Personnel Grounding.
- Antistatic table top.
- Shelf for storage and drawer on the right side bottom of table top.
- Provision to fix 10 nos of Antistatic bins & to hand drawing for operator reference.
- 4 nos of power points 5 amps with main on-off switch main indicator lamp and MCB.
- Snap fasteners for grounding connection.
- Frames powder coated or ESD powder coated.
- Comfortable, designed not to pinch or pull hair.
- Long wearing, easy to clean, superior contact.
- Adjusts quickly and easily to any size.
- For reliable removal of generated static charges.
Cordless ESD wrist strap charges generated by the technician and protect static sensitive electonics.
ESD Wrist Strap is a basic and widely facility in ESD equipment usage or cleanroom, it is very convenient for worker to operate.
Material of the band: Metal and ABS rubber complexed.
Discharge time: 0.1s
- Comfort and adjustability
- Highly abrasion resistant, long lasting.
- Ensures complete static dissipation.
- Comes with 1 meg ohm safety resistor.
- Durable, low dust generation & comfortable
- Non-slip PVC sole, does not stain floor Resistance of the 6 9 -10 sole: 10 -10 ohms/sq
- Most comfortable Steel toe safety shoe.
- Uppers are mode from genuine leather for comfort
- Steel toe cap can take up to 15 kn of resting pressure and is also rust resistant.
- Light weight and comfortable. 6 9
- Resistance of the sole : 10 -10 ohms/sq
- Sizes – S, M, L, XL.
- Low density Polyethylene impregnated with antistatic property.
- Available in roll tubing, cut sheet, bags, zip lock bags.
- Surface resistivity < 10 ohms/sq.
- Prevent build-up of static charge and protect components from ESD damages.
- Low density Polyethylene impregnated with antistatic property.
- Protect components and PCB assemblies from ESD damages.
- Available in cut sheets, pouches and roll form.
- Surface resistivity < 10^12 ohms/sq.
- Combine static shielding and air bubble cushioning bag.
- Layer combination according to requirement
- Provide EMI / RFI shielding and ESD control for PCB assemblies.
- Specially designed for dry packaging of moisture sensitive components.
- Constructed with Static dissipative outer coating, polyester barrier layer, polyethylene and static dissipative inner coating.
- Waterproof, vapourproof and greaseproof.
- lFaraday cage effect of the metalized layer shields electronic devices
from ESD and electronic fields.
- Durability is enhanced by sandwiching the metal layer between
polyester and polyethylene.
- Four layer construction offers excellent protection
Bags are printed with ESD warning symbol and date coded for QC traceability.
- Testable to industry standards.
- Surface Resistance outer and inner layer <10 ohms/Sq & middle layer < 10 ohms/Sq
Conductive Grid Tapes are three layer tapes that have a conductive grid buried between two static dissipating copolymer substrates. They provide an anti static non-sparking surface on both the inside and outside that will not shed, crack, chip, or rub off. They are packaged on a 3 inch core with an ESD symbol printed on the tape. These conductive tapes are used in packaging products that are static sensitive and require EMI shielding. They can be used for grounding as well.
Enriched with years of experience, we offer ESD Floor Marking Tapes to our customers. These tapes are available in attractive colors and are used to partition the applied area. These Floor Marking Tapes are available in different dimensions and sizes and can be customized as per the functional area. With the assistance of our skilled and dedicated professionals, we are able to cater diverse requirements of the clients most efficiently.
Floor marking Tape is widely used for lane marking, section segregation, color-coding, hazard warning labeling, sealing, and identifying. It is the initial marking material for ground, electrical post building, vehicles and ramp post, etc.
SMT Production Line, Printing Workshop, Computer Room, Electronic Component Maintenance Room, Combustible & Explosive Area
Available Size: 8mm,12mm,16mm,24mm
Available Colour : Yellow, Black,Green
Product name: SMT plier stapler splice tool
Model Number: KH-538
Type: Machine Tools
1.Apply in all kinds of SMT material 2. (Paper or Emboss Type Reel) connecting 3. Swift connecting based on handy type 4. Easy to operate 5.Easily installing the Splice Clip 6. Great of durability by heat treatment of special steel 7.efficiency enhanced 8.remaining is fully utilized
SMT splice pliers is used for crimping splicing shims and brass splice clip. The splice clip pliers is an ideal plier tool for crimping smt splice clip. The smd splice tool is ususally used together with splice cut tool, smt cutting tool, or smd reel cutter.
2. Splice tape used together with splice tool and splice clip.
Hot Melt, Pressure Sensitive, Water Activated
Smt Cover Tape Extender
1,The applicable to joint SMT carrier tape ,ensure non-stop to joint for all kinds of SMT carrier tape.
2,Easy operation, save labor, improve benefit of production, save cost.
3,High quality , high accuracy , good price
4,Main Color of products : Yellow ,Blue ,black.
5,the shelf life is about half year to a year, Storage condition: under about 10-30 degree.
6,Package:500pcs/bag for 8mm-16mm, 250pcs/bag for 24mm-44mm
1,For all carrier tapes splicing ,with accuracy placement hold splicing hard.
2,AI splice clip was used for AI component.
3,New style sheet splice copper clip that is not scrap side extended during jointing operation to avoid
hurting operator’s hand, and reduce copper scrap
SMT Copper Clip
Single side Splice tape
SMT、electronic、LCD, semiconductor industry and so on.
Our top quality precision tweezers are manufactured by a group of highly qualified and experienced craftsmen.
These tweezers were designed for solving problems relating to the precise handling of components in the electronics, semiconductor, media, jewellery or other industries where the handling of intricate items present a problem.
Finest materials are selected and honed with microscopic details using years of experience.
The result is a product that unique, special and performs with excellence that secures the quality of your products.
Other materials are available upon request.
Heat resistance up to 150ºc
High acid and alkali resistance
General information about ESD Plastic Tray
ESD blister packing tray is made of PS as basic material, it can be made with only black color for conductive type, half-antistatic type etc. It has very good property and the conductive property will not be influenced by any humidity and temperature factors. It is permanent conductive.
Application of ESD Plastic Tray : Disk industries, Semiconductor industries, Electronic product assembly and packaging
This material can be made into IC tray, LCD tray, Electronic Component tray, FPC tray etc. The surface resistance is very stable even after vacuum forming. It has very good property and the conductive property will not be influenced by any humidity and temperature factors.
Material: 98% Polyester filament fiber + 2% conductive fiber .Conductive Fiber Interval: 5mm Grid (2.5mm Grid and 5mm stripe also available)
Feature : Antistatic, Dust-proof, Durable & Reusable, Breathable & Comfortable
Color: Pink (Blue, White, Green, Yellow are available )
Packing : 20 PCS / Bag; 500 PCS / Carton
Surface Resistance: 10E7-10E9 ohmn
Material: Polyester + ESD fiber
Size: S, M, L
10E6 ~ 10E9 ohm/sqm:10E6 ~ 10E9 ohm/sqm
Conductive fiber Space:5mm, 10mm
Static decay time:0.1Sec
Usage: Widely use for electronic industry, optical, cleanroom, ect.
Material:98% Polyester+2%Conductive Fiber
Style:Turn-Down Collar /Round Collar
Anti Static Clothing Resistive:106-109
Conductive NBR material and high elasticity expanded PU provides perfect cushioning and excellent anti fatigue, high resistant to chemical abrasion and heat resistance function.
Relieving foot and back pain from standing for long time.
Anti static all yellow grounding wire
Coil Cord Diameter
Bracelet resistance： 10E 3 ohms, Surface of strap: 10E 6 ohms, insulated
Product name : ESD Rubber Mat Buckle
Performance : Anti-static
Material : steel
Size : Customized Sizes
Application : For ESD Rubber Mat,ESD Wrist Strap
Type : 2pc/set
WIFI : No
Product name : ESD Wrist Strap Grounding Socket
Wire Insulation : PVC
Color : black+green,black+yellow,or Customized
Cord Length : 15 feet
Ground Terminal:#10 Ring Type
Resistor:1 Meg Ohm
Size of PCB
Side guide slot
depth 3.5mm, width 5mm , pitch 10mm
conductive side pannel, aluminum pillar ,zincification steel base.
Adjustable side pannel . fast, simple gear adjusting
SMT Equipment Storage, PCBTransportation